Self levelling compound at a vehicle testing facility – Brackley
We were appointed to improve the existing concrete slab at a vehicle testing facility in Brackley, where the client required an SR1 level surface for mounting and calibrating precision testing equipment. The existing slab did not meet the required level of surface regularity, so careful floor preparation and remedial work were required before the new surface could be installed.
The work began with localised crack repairs, followed by the application of an epoxy DPM with a quartz scatter. This created a suitable mechanical key for the self levelling compound to bond to. We then applied C40 self levelling compound to achieve the highly level surface required for the testing equipment. Several stages of preparation and application were involved to ensure the finished floor was suitable for the demanding requirements of the facility, with the project completed in approximately 3–4 days.
SR classification
SR classification forms part of the British Standards approach to measuring surface regularity and is used to assess how level a floor surface is. There are three main classifications: SR1, SR2 and SR3, with SR1 representing the highest level of surface regularity. For an SR1 surface, a 2m straightedge is placed on the floor and a slip gauge is used to measure any gaps beneath it. The maximum permitted gap for an SR1 surface is 3mm.
Where an existing concrete floor does not meet the required SR tolerance, remedial measures can include localised grinding, the application of smoothing or self levelling compounds, or removal and replacement of affected areas. For this project, the combination of crack repairs, epoxy DPM, quartz scatter and C40 self levelling compound provided the required surface for the client’s precision testing equipment. We also included epoxy line marking as part of the completed floor works.
- Client : Vehicle testing facility
- Location : Brackley, Northamptonshire
- Date : 2024
Project details
- Project: Self levelling compound at a vehicle testing facility
- Location: Brackley, Northamptonshire
- Required finish: SR1 level surface
- Preparation: Localised crack repairs and epoxy DPM
- Bonding layer: Quartz scatter
- Floor system: C40 self levelling compound
- Additional works: Epoxy line marking
- Time scale: Approximately 3–4 days
We carry out specialist resin flooring and floor preparation work for vehicle testing facilities, workshops and other automotive environments. Our work takes us across the region, including Northampton, Milton Keynes, Oxford and Peterborough, as well as throughout the wider Midlands and East Midlands.
If your existing floor needs to achieve a higher level of surface regularity for testing equipment, machinery or other precision applications, get in touch with Liberty Floor Solutions to discuss your requirements. We can assess the existing slab, carry out the necessary floor preparation and recommend a suitable self levelling or resin flooring system for your facility.

